25 results match your search criteria
$200,000
LGK-S107 Analog Heat Source Instrument
Overview: LGK-S107 analog heat source instrument (heating tool) is independently developed and designed by Wuhan CenterRise M&C CO., Ltd. This instrument is a heating and testing equipment used to test the performance of the thermocouples installed in the mold in continuous casting machine. After the installation o...
Condition: New
Transaction: Sell
$200,000
Roll Gap Measuring Instrument
Overview SPD series roll gap checker is a special measuring instrument for continuous casting roll gap developed by Wuhan CenterRise M&C Engineering CO. It has the characteristics of compact structure, easy use, small size, and comprehensive functions. It is widely used in continuous casting production and maintena...
Condition: New
Transaction: Sell
$200,000
CPL-N200 Mold Surface Cladding Detection Equipment
Overview： This product is a new type of mold copper plate surface cladding detection equipment. The equipment adopts a high-precision and high-sensitivity laser ranging sensor, which scans the copper plate of the mould by scanning a laser line with a fixed width, and returns the measurement data in real time. After mod...
Condition: New
Transaction: Sell
$200,000
ZST-P100 Online Continuous Temperature Measurement of the Billet End
Overview The system aims at the continuous temperature detection of the product obtained from the continuous casting machine. The billets and their surrounding environmental factors such as scale, steam, shielding and other factors, are considered in the scheme design and equipment selection. The accurate detection and...
Condition: New
Transaction: Sell
$200,000
LAG-S400 Infrared Converter Slag Detection System
Overview The infrared converter slag detection system uses a far-infrared thermal imager to monitor the situation of converter tapping in real time, and is connected to the main control computer in the electrical room through the conversion and transmission of video signals. The radiation intensity in the infrared wave...
Condition: New
Transaction: Sell
$200,000
CPC-D100 CPC Photoelectric Strip Automatic Center Position Control System
The composition of the system The photoelectric strip automatic center position control system is mainly composed of sensors, amplifiers, PLC controllers, hydraulic control and other parts. System composition block diagram The main technical parameters 1. Detection width: 300-2800mm 2. Detection light source: 220VAC. (...
Condition: New
Transaction: Sell
$200,000
LDC-X200 Laser Wire Rod Bar Diameter Measuring System
Overview The non-contact diameter measuring system, is mainly used in the measurement of the outer diameter of various wire rods, bars, wires and pipes. The system can detect the change of the diameter (outer diameter) of the measured object in real time under the high temperature state. The working principle The diame...
Condition: New
Transaction: Sell
$200,000
WGS-C200 Slab Strip Width Measuring System
Overview The width measuring system adopts dual industrial CCD cameras to proceed the online measurement of the steel plate on the roller bed by using the principle of stereo vision technology, and combines the high-speed digital signal processing technology and programming software to process the signals accordingly, ...
Condition: New
Transaction: Sell
$200,000
IndustriaI Cable for Steel Plant for Steel Mill for Continuous Casting
Overview Our company focuses on the production and application of the cables in continuous casting steel production. We have rich on-site usage experience, which provides us with technical guarantees for manufacturing high-quality communication cables. For cables of different applications, we have different protection ...
Condition: New
Transaction: Sell
$200,000
LGK-JS02-064 Handheld Thermocouple Calibrator
Overview LGK-JS02-064 handheld thermocouple calibrator (referred to as thermocouple calibrator). The calibrator is specially used for thermocouple temperature measurement. It has built-in 2 high-precision and high-stability thermocouple temperature conversion chips, which can measure the temperature data of two-way the...
Condition: New
Transaction: Sell
$200,000
LDT-L200 Ladle Lining Laser Thickness Gauge
Overview LDT-L200 is a new generation of ladle lining thickness gauge launched by our company. The system equipment emits a pulsed laser beam to the lining surface of the ladle, and receives the returned laser light to measure its transmission time. Then the system equipment calculates the distance between the equipmen...
Condition: New
Transaction: Sell
$200,000
SPD-V200 Strand Condition Monitor
Overview In order to ensure the quality of the slab, it is necessary to strictly control the performance and various parameters of the CCM’s guide roll within a certain error range. Due to the continuous casting machine (CCM) is large and in a harsh production environment, it is difficult to measure the performance of ...
Condition: New
Transaction: Sell
$200,000
LDT-N200 Ladle Comprehensive Management System
Overview: In the steelmaking production process, the ladle is the key equipment for holding molten steel, secondary refining, and continuous pouring. In a modern steelmaking plant, refractory materials are required for converters, refining, and ladles. In the steelmaking process, ladle is the main equipment for using a...
Condition: New
Transaction: Sell
$200,000
SPD-V010 Handheld Roll Gap Checker
Overview The handheld roll gap checker is specially used to measure the length between spherical surface, arc surface and plane (or spherical surface). It is specially suitable for the opening adjustment of the roll gap of the metallurgical continuous casters in various specifications, because the roll gap checker has ...
Condition: New
Transaction: Sell
$200,000
MDC-K120 Slab Mold Taper Measuring Instrument
Overview The taper of the narrow face of the mold has an important influence on the quality of the casting billet. Excessive taper will cause the mold to squeeze the billet shell, and a small taper will increase the air gap. With the continuous increase of the requirements of the casting billets’ quality and the contin...
Condition: New
Transaction: Sell
$200,000
ZSQ-T200 Online Surface Quality Inspection System for Continuously Cast Product (CCD)
Overview The surface quality inspection of high temperature cast product is of great significance to the repair of cast product’s defects and the hot delivery of hot cast product. The ZSQ-T series of online surface quality inspection equipment for casting billets developed by Wuhan CenterRise M&C Engineering Co., L...
Condition: New
Transaction: Sell
$200,000
SCL-L102 High-Precision Billet (Cut-by-Weight) Cut-to-Length System
Overview The system realizes the fixed-length measurement of the width, thickness and length of the continuously cast product through machine vision and laser rangefinding system. The measured data is transmitted to the host system through the optical fiber. The host system calculates the weight of each billet accordin...
Condition: New
Transaction: Sell
$200,000
SCL-L012 Infrared Billet Cut-to-Length System
Overview The all-digital non-touching infrared automatic cut-to-length system developed by Wuhan CenterRise M&C Engineering Co., Ltd. is the first digital measurement, digital transmission, digital positioning and digital control technology in China. It is suitable for the primary and secondary cutting of continuou...
Condition: New
Transaction: Sell
$200,000
MAC-G320 Automatic Mold Powder Feeding Machine
Overview MAC-G320 automatic mold flux feeding system is a new generation product of automatic adding mold flux, which is independently developed by Wuhan CenterRise M&C Engineering Co., Ltd. According to different steel grades, casting speed, vibration and other process parameters, then the system can analyze and c...
Condition: New
Transaction: Sell
$200,000
MTM-C100 Mould Online Width Adjustment and Taper Measurement
Overview In order to meet the needs of producing various specifications of continuously cast products, shorten the time for replacing the mold, and improve the production capacity and production efficiency of the continuous casting machine, the mold online width adjustment system is the key technology for efficient con...
Condition: New
Transaction: Sell
$200,000
MOC-K100 Mold Oscillation Online Monitoring System
Overview Mold is the casting billet forming equipment in continuous steel casting, and it is also the core equipment and key technology of continuous casting machine. Its function is to forcibly cool the high-temperature molten steel continuously injected into its inner cavity through the water-cooled copper plate to e...
Condition: New
Transaction: Sell
$200,000
MTD-A100 Mold Powder Thickness Detection System
Overview： Mold powder is mainly used in the continuous casting and steelmaking process, evenly sprinkled on the molten steel surface in the mold to lubricate, keep warm, prevent oxidation and absorb non-metallic inclusions. Mold powder is an indispensable auxiliary production material in the production process. In the ...
Condition: New
Transaction: Sell
$200,000
BPS-K600 Mold Breakout Prediction System
Overview: The BPS-K600 continuous casting mould breakout prediction system is developed by Wuhan CenterRise M&C Measuring Co., Ltd. It adopts artificial neural network and combines with traditional artificial intelligence and information processing technology to overcome the defects of traditional logic-based predi...
Located: Bhimber, Azad Kashmir, PK
Condition: New
Transaction: Sell
$200,000
MLC-V235 Continuous Casting Mold Level Control System
Overview The automatic control for the molten steel level of the mold is one of the key technologies of continuous casting production. It is very important to reduce the labor intensity of workers, improve production efficiency, improve the quality and output of casting billet, reduce overflow and breakout of steel and...
Condition: New
Transaction: Sell
$200,000
LAG-S100 Ladle Slag Detection System (Eddy Current)
Overview The continuous casting ladle slag detection device is used to detect the slag content of the ladle nozzle in the steelmaking continuous casting process, so as to improve the cleanliness of the tundish molten steel and obtain the best yield of the ladle molten steel. The device adopts the principle of electroma...
Condition: New
Transaction: Sell
Save this search
Save this search and get notified when new offers are posted.
- 1
